Enjoying a concert is a fun thing. However, hosting it is more fun. When you are one of the organizers of a concert, then you got to get the proper lighting to set up the stage. The said lighting must be appropriate to the kind of concert you are having. One of the best lighting you can have would be RGB laser show system.
This should be the kind of equipment that you will have to get when you want to take advantage of lasers to light up the stage and hype up the excitement that the audience feels. If you think that this is one of the lighting you should have, then know what you should consider when picking this. Here are some of those factors to know of.
Beam direction. Since you are utilizing the lasers, you will be using beams to create graphics and the likes. You have to properly aim to the beams to its proper course so that it can create the graphics you desire. Moreover, it should be positioned over the audiences' heads. Thus, you have to ensure that there is proper beam directions.
The graphic screens should be one of your consideration as well. You need to pick the right graphics screen for your work. Instead of the front-projection usual in day shows, it is better to have the rear-projection. After all, this will allow the audience to avoid seeing the beams, which then gives a magical feel for the graphics they are seeing.
Equipment positioning. You have many equipment that you got to be aware of when you are utilizing the lasers as part of your lighting in the event. When you use the lasers, you have to know where the related equipment must be placed to optimize their use. Thus, it is required that you know of the proper equipment positioning beforehand.
The control positioning and set-up time should be considered as factors for choosing the said stage equipment as well. The lasers require a set-up time and you need to control the console space requirement such as lighting and audio. This is so that everything will be in sync and nothing will look out of place.
Safety regulations. The use of the said equipment can pose some risks when not used properly. That is why it is highly important to ensure that safety regulations are met regarding the use of these equipment. Not only the recognized safety rules, you also have to follow the federal and government law regarding the matter.
Measure the ceiling heights. In the requirement by the state, it is normally required of you to have at least ten feet or three meters above where people could stand as well as eight feet or two and a half meters for people to reach sideways. You have to follow this requirement since this is also for the safety of the audience.
Reflective surfaces. You might find a lot of reflective surfaces in the venue. You can find them in the chandelier, mirror strips, and other similar items. It is vital that you do not allow the beams to hit these surface since the beams might be redirected where the audience is. You must avoid stray beam reflections as much as you can.
This should be the kind of equipment that you will have to get when you want to take advantage of lasers to light up the stage and hype up the excitement that the audience feels. If you think that this is one of the lighting you should have, then know what you should consider when picking this. Here are some of those factors to know of.
Beam direction. Since you are utilizing the lasers, you will be using beams to create graphics and the likes. You have to properly aim to the beams to its proper course so that it can create the graphics you desire. Moreover, it should be positioned over the audiences' heads. Thus, you have to ensure that there is proper beam directions.
The graphic screens should be one of your consideration as well. You need to pick the right graphics screen for your work. Instead of the front-projection usual in day shows, it is better to have the rear-projection. After all, this will allow the audience to avoid seeing the beams, which then gives a magical feel for the graphics they are seeing.
Equipment positioning. You have many equipment that you got to be aware of when you are utilizing the lasers as part of your lighting in the event. When you use the lasers, you have to know where the related equipment must be placed to optimize their use. Thus, it is required that you know of the proper equipment positioning beforehand.
The control positioning and set-up time should be considered as factors for choosing the said stage equipment as well. The lasers require a set-up time and you need to control the console space requirement such as lighting and audio. This is so that everything will be in sync and nothing will look out of place.
Safety regulations. The use of the said equipment can pose some risks when not used properly. That is why it is highly important to ensure that safety regulations are met regarding the use of these equipment. Not only the recognized safety rules, you also have to follow the federal and government law regarding the matter.
Measure the ceiling heights. In the requirement by the state, it is normally required of you to have at least ten feet or three meters above where people could stand as well as eight feet or two and a half meters for people to reach sideways. You have to follow this requirement since this is also for the safety of the audience.
Reflective surfaces. You might find a lot of reflective surfaces in the venue. You can find them in the chandelier, mirror strips, and other similar items. It is vital that you do not allow the beams to hit these surface since the beams might be redirected where the audience is. You must avoid stray beam reflections as much as you can.
No comments:
Post a Comment