One of the most artistic techniques that is used for creative image design and inscription of symbols is glass carving. It has been in use for centuries. One particular technique used with it is sand-carving that was first utilized in the late 19th century. It was, and is still being used for creating multilevel abrasive etchings. Once the required designs have been etched into the glasses, light and shadow details are added. In consideration of glass carving Alberta offers one of the best options.
When carving glasses, there are 3 main things that are required; etching cream that is acid based, foam brush and stencil. To begin with, the glass piece is placed on a surface that is flat then it gets sprayed with an appropriate cleaner. In order that the etching cream may properly adhere to the surface it is being carved on, the surface has to be very clean and dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
For purposes of safety, one should wear goggles and latex gloves during the exercise. There are very strong fumes that are produced from the cream which have diverse effects on different people. People with sensitive eyes especially would have to wear goggles, lest their eyes be affected further. People that are allergic to latex should use rubber gloves or vinyl.
A layer of masking tape should be applied towards the edges of the stencils, more so in sections where they meet glass. This offers protection for parts that are not supposed to be carved. When such parts come into contact with the cream, the design will likely get ruined. The cream is placed onto the form brush and the brush used for evening out the application. The corners and edges should be watched closely to ensure the cream covers all sections.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
There are very many people that appreciate the beauty of carved glass. Such carvings will always be seen in shops that sell gifts, in glasses and also in fancy windows. The fact that there are not so many people that deal with the carvings means that as a business it can be very profitable.
In considering the business of glass carving Alberta business people would need three main things. These are resists, blast cabinet and a well lit studio. It is a business that is profitable if the right marketing is done. Marketing is done by creating brochures, making a website and even setting booths at local events.
When carving glasses, there are 3 main things that are required; etching cream that is acid based, foam brush and stencil. To begin with, the glass piece is placed on a surface that is flat then it gets sprayed with an appropriate cleaner. In order that the etching cream may properly adhere to the surface it is being carved on, the surface has to be very clean and dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
For purposes of safety, one should wear goggles and latex gloves during the exercise. There are very strong fumes that are produced from the cream which have diverse effects on different people. People with sensitive eyes especially would have to wear goggles, lest their eyes be affected further. People that are allergic to latex should use rubber gloves or vinyl.
A layer of masking tape should be applied towards the edges of the stencils, more so in sections where they meet glass. This offers protection for parts that are not supposed to be carved. When such parts come into contact with the cream, the design will likely get ruined. The cream is placed onto the form brush and the brush used for evening out the application. The corners and edges should be watched closely to ensure the cream covers all sections.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
There are very many people that appreciate the beauty of carved glass. Such carvings will always be seen in shops that sell gifts, in glasses and also in fancy windows. The fact that there are not so many people that deal with the carvings means that as a business it can be very profitable.
In considering the business of glass carving Alberta business people would need three main things. These are resists, blast cabinet and a well lit studio. It is a business that is profitable if the right marketing is done. Marketing is done by creating brochures, making a website and even setting booths at local events.
About the Author:
In order to become better informed about the process of glass carving Alberta residents should first review the details here at www.claudegarneaustudio.ca. To learn more, simply check out this homepage on http://www.claudegarneaustudio.ca.
No comments:
Post a Comment